StarGazer Solar Power Kit Southern Latitudes (2 StarGazers)


SKU: SG-SOLAR-SL-2SG Category:


This Kit Includes the following:

For use with two StarGazer LED Downlights


Qty 1 – Solar Panel 200 Watt 24v

Solar Panel 200 Watt 24v 200J-B, offering a 200 watt 24v offers 72 crystalline silicon cells in series, front cover High transmission 3.2mm (1/8th in) glass, encapsulant EVA, back cover White polyester, frame Silver anodized aluminum, junction box IP65 with 4 terminal screw connection block, dimensions 1229 x 674 x 50mm / 48.4 x 26.5 x 2in, weight 9.98kg / 22.0lbs


  • Built to last. From mountaintops to off-shore platforms, on weather stations in the bitter cold of Antarctica and on telephone signal repeaters in the hot Australian outback, the technology has been proven in the harshest environments.
  • Accessible junction box for off-grid connections,  J-type junction box has accessible terminals for easier module interconnections in off-grid applications, and it allows fitting cable glands for various cross-sections.
  • Thick, durable scratch resistant back sheet. The thick back sheet provides extra insulation and increased resistance to protect your module against rough handling. The white polyester material lasts longer and increases energy production.
  • High reliability. Cell interconnections and diode placement use well-established industry practice and are field-proven to provide excellent reliability.
  • Quality and certifications. ISO 9001 factory certification ensures that our manufacturing facilities use proven manufacturing and quality control processes.



Qty 1 – BBA-2 Solar Battery Box Enclosure

Heavy Duty Enclosure. The BBA2 is a heavy-gauge aluminum weather-proof battery enclosure perfect for 2 Group 27 size batteries for your off-grid industrial or commercial application. Other battery sizes can fit too–just check the dimensions. The BBA-2 is fabricated from .125 5052 aluminum and is manufactured to NEMA 3R specifications.

Mountable. Mounted on an aluminum ground (skid) mount frame.


  • 18″ H x 18″ W x 18″ D (ground/skid frame dimensions 60″ L x 21″ W x 36″ H) note; dimensions may vary depending on the number of solar panels and batteries required per region
  • 15″ x 15″ Removable Back Panel


  • Brushed Aluminum (Cooler than steel)
  • Lightweight and Durable
  • NEMA 3R
  • Stainless Steel Hinge and Hardware
  • Stainless Steel Padlock Hasp
  • Closed Cell Neoprene Gasket
  • Screened / Louvered Air Vent
  • 3 pre-drilled locations with strain relief connectors installed to allow solar input cable and outputs for StarGazer lights



Qty 2 – UPG Battery Sealed Gel Solar Battery – 12V (UB121100)


The UB-121100 by UPG is a 12 volt, valve regulated, absorbent glass mat battery. Absorbent glass mat (AGM) batteries offer a few key advantages over flooded lead acid batteries, including: spill-proof performance in any position, better performance in high-power applications, and no need to maintain the water level. Batteries are wired in series to create 24 volt DC output (cable provided)


UPG Battery UB-121100 Sealed Gel Solar Battery Features

  • Dimensions (LxWxH): 13 × 7 × 11 inches
  • Weight: 75 lbs
  • Low maintenance
  • Valve regulated, allowing for storage in a confined space
  • 12-volts
  • Float and cycle use
  • 110 amp hour capacity @ 20 hr. discharge rate
  • Won’t spill
  • Rope Handles
  • MPN: UB121100


Qty 1 – Morningstar SunLight 10 24V

The SunLight SL-10L-24V PWM Charge Controller  has all of the features of the SunSaver controller. It also has a rotary switch that allows it to turn on the loads after dusk for 2, 4, 5, 8, or 10 hours.It also has the option to turn loads on at dusk, off during the night, and on again before dawn. Another available option is to have it on from dusk until dawn. It comes with a test button that turns on the light for five minutes.


Features & Attributes

  • Dimensions (LxWxH): 2.2 × 6.6 × 1.3 inches
  • Weight: .6 lbs
  • Using solar array voltage to determine day and night, the SunLight provides 10 different lighting control options.
  • By measuring the length of the night, the SunLight’s ON/OFF/ON options provide the capability to turn on the light at sunset, turn off the light after 3 to 6 hours, and then turn on the light again for 1 or 2 hours before sunrise.
  • The length of the night is calculated by taking a 4 night average, and thus it automatically adjusts for seasonal changes in the length of the night.
  • The test button helps the installer by blinking the red LED to confirm correct selection of lighting control option, and also turns on the light for 5 minutes to verify that the light is operating correctly.
  • Timer accuracy is within 2 seconds.
  • MPN: SL-10L-24V


Qty 1 – Ameresco Solar Skid Mount

  •  Ground/skid frame dimensions 60″ L x 21″ W x 36″ H) note; dimensions may vary depending on the number of solar panels and batteries required per region


Qty 1 – Solar Output Cable

Additional information

Weight 106 lbs
Dimensions 30 × 45 × 55 in
© Flagsource Unlimited. All Rights Reserved. Privacy Policy
Site Created by KC Web Specialists, LLC